How to Assemble the Squadt Olive Drab Tee on 6-Inch Figures

By Designer Toy Store | Art Gallery | Rotofugi | Published: 2026-10-29

Category: How-to Guides

Learn to dress your 6-inch Squadt figure in the limited Olive Drab Tee. Step-by-step fitting tips, common mistakes, and what to know before you start.

Quick Answer

To assemble the Squadt Olive Drab Tee on a 6-inch Squadt figure, gently stretch the shirt over the figure's arms and torso, then adjust the fit. Work slowly to avoid tearing the fabric or damaging the figure.

Why Fit Matters for Designer Toy Apparel

The Squadt Olive Drab Tee is designed to fit all 6-inch Squadt figures, but the fit can vary slightly depending on the figure's exact proportions. Taking a few extra seconds to align the shirt before pulling it on can prevent stress on the fabric and keep the logo centered.

Because this tee is limited to 200 pieces, it's worth handling with care. A rushed assembly can lead to stretched seams or a crooked logo, which is hard to fix once the shirt is on.

What to Know Before You Start

The tee comes packaged in a polybag and is made for the Squadt Assembly Pop-Up Shop and Exhibit. It does not include the Squadt figure itself, so you'll need a 6-inch Squadt to dress.

The shirt is a single piece with no snaps or fasteners, so the entire garment must be pulled over the figure. This means you'll need to work the fabric over the head and arms carefully.

Step-by-Step Assembly

Prepare the figure and shirt: Lay the Squadt figure on a flat surface and remove the tee from its polybag. Check that the logo is facing forward and the shirt is not twisted inside out. If the shirt looks twisted, turn it right side out before starting.
Stretch the neck opening: Gently stretch the neck opening of the tee with both hands. Slide it over the figure's head, being careful not to snag the fabric on any protruding details. If the head is larger than the opening, stretch the fabric slowly to avoid tearing.
Guide the arms through the sleeves: One at a time, gently push each of the figure's arms through the sleeves. Use your fingers to ease the fabric over the shoulder joints without pulling hard. If the arm gets stuck, pull the sleeve down rather than forcing the arm through.
Adjust the torso fit: Pull the shirt down over the torso and smooth out any wrinkles. Make sure the hem sits evenly and the logo is centered on the chest. Check that the shirt isn't twisted around the torso before you finish.
Final pose and display: Once the tee is in place, pose the figure as desired. Avoid extreme poses that might stretch the fabric or cause the shirt to ride up. If the shirt rides up, gently pull it back down rather than leaving it bunched.

Product Details

Squadt Assembly Olive Drab Tee for 6" Squadts: This tee is limited to 200 pieces and features the Squadt Assembly logo in orange on an olive drab shirt. Because it's a limited run, careful assembly helps preserve the shirt's condition and the logo's appearance.
Squadt Assembly Olive Drab Tee for 6" Squadts